Measurement of attachment force of microbial cells

A parallel-plate flow chamber consisting of two transparent electro-conductive glass plates was constructed. The two glass plates were set parallel to each other and connected to a potentiostat apparatus to regulate the strength of the electric field between the plates. A microbial cell suspension was flowed through the chamber. This system enabled the application of an electrostatic force to suspend charged particles, e.g. microbial cells, existing between the two plates. The time course of the cell attachment of Pseudomonas syringae pv. atropurpurea NIAES 1309 suspended in 10 mM phosphate buffer solution (pH 7.0) to the glass plate was investigated at various electric field strengths ranging from −4.2 to +4.1 V cm⁻¹. The attachment rate and the maximum number of attached cells increased linearly with the increase in the strength of the positive electric field. In contrast, the rate and the number of cells decreased linearly with the decrease in the strength of the negative electric field. These linear relations gave a specific value for the strength of the electric field (−5.9 ± 0.7 V cm⁻¹) where the electrostatic repulsion and the microbial attachment force were thought to be equal, resulting in no cell attachment. From this value, the electrostatic repulsion, i.e. the microbial attachment force, was calculated to be 5.0 × 10⁻¹¹ N cell⁻¹ for cells of average size.     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .     

Structure inhomogeneities of medium-range order in fluorozirconate glasses

Images of cleaved surfaces were obtained for 53ZrF₄-20BaF₂-4LaF₃-3AlF₃-20NaF (ZBLAN) glasses and fused quartz using an NTMDT atomic force microscope. It is shown that the scatter of particle size depends on the cooling rate and is 21–48.5 Å for the cleaved surface of ZBLAN glass obtained by very fast cooling and 68–172 Å for the cleaved surface of ZBLAN after slow cooling. For cleaved fused quartz, the range is 25-18 Å.     

聚乙二醇在高真空条件下的单链弹性

在过去二十年间，高分子的单链弹性已经得到了广泛的研究.然而由于环境和高分子之间往往有着复杂的相互作用，实验中很难得到高分子在严格无扰状态下的单链弹性（即本征弹性）.为此，利用单分子力谱技术研究了高真空条件下聚乙二醇（PEG）的单链弹性.结果表明，由于高真空条件下溶剂分子的干扰被消除，PEG在这一准无扰状态下呈现其本征弹性.在非极性有机溶剂中，由于溶剂分子和PEG之间只有微弱的范德华力作用，PEG表现出和高真空中基本一致的弹性.然而，在不同环境中，力曲线的低力区（F<100 pN）存在着细微的差异.这一现象可归因于不同条件下基底与PEG链之间的吸附力不同.采用的高真空力谱可用于研究其他高分子单链在准无扰状态下的本征弹性.     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002     

Monte Carlo simulation of polarizable systems: Early rejection scheme for improving the performance of adiabatic nuclear and electronic sampling Monte Carlo simulations

An early rejection scheme for trial moves in adiabatic nuclear and electronic sampling Monte Carlo simulation (ANES-MC) of polarizable intermolecular potential models is presented. The proposed algorithm is based on Swendsen–Wang filter functions for prediction of success or failure of trial moves in Monte Carlo simulations. The goal was to reduce the amount of calculations involved in ANES-MC electronic moves, by foreseeing the success of an attempt before making those moves. The new method was employed in Gibbs ensemble Monte Carlo (GEMC) simulations of the polarizable simple point charge-fluctuating charge (SPC-FQ) model of water. The overall improvement in GEMC depends on the number of swap attempts (transfer molecules between phases) in one Monte Carlo cycle. The proposed method allows this number to increase, enhancing the chemical potential equalization. For a system with 300 SPC-FQ water molecules, for example, the fractions of early rejected transfers were about 0.9998 and 0.9994 at 373 and 423 K, respectively. This means that the transfer moves consume only a very small part of the overall computing effort, making GEMC almost equivalent to a simulation in the canonical ensemble.     

Computation of density of perfluoroalkyl methacrylates: a molecular modeling approach

Molecular dynamics simulations have been carried out on different perfluoroalkyl methacrylates to predict their densities. Density calculations on selected perfluoroalkyl methacrylates have been performed using molecular dynamics in the NPT ensemble by employing COMPASS force field. The calculated density values compared quite well with the experimental data reported in the literature.     

Adsorption of water molecules in slit pores

We report molecular dynamics (MD) simulations on the adsorption of water in attractive and repulsive slit pores, where the slit and a bulk region are in contact with each other. Water structure, surface force and adsorption behavior are investigated as a function of the overall density in the bulk region. The gas–liquid transition in both types of pores occurs at similar densities of the bulk region.